US: 847-749-0633 |

Angle Heads

Heimatec‘s standard and custom Angle Heads are designed and manufactured to handle the most difficult manufacturing processes. They are ideal for heavy milling operations because they are supported by twin or double twin sets of matched angular contact bearings plus a rear radial support bearing.

All gears used in our Angle Heads have inclined teeth, are made from high resistance gear steel, and are specially hardened, ground and lapped in sets to provide the smoothest transmission output available.

Heimatec Angle Heads are made from special high tensile aluminum and all surfaces are sandblasted and anodized blue. We only use high precision spindle bearings, ABEC 7(P4), Timken bearings, or custom bearing systems to assure the highest possible spindle concentricity.

  • Rigid, accurate and powerful
  • Ideal for milling, drilling and tapping applications
  • Full 360 degree body rotation with positive compression locking
  • 90 degree incremental repositioning without indicating
  • Spindle rotation is reversed
  • Accommodated by most ATCs
  • Universal ring primary alignment with main spindle’s drive keys
  • Maximum torque: 150 Nm
  • Gear ratio: 1:1 standard (Higher or lower ratios available)
  • Spindle speeds up to 15,000 rpm
  • Interchangeable torque arms

Features

Bearing Systems

All bearing seats are precision manufactured for greater output and alignment accuracy. Bearings are standard high precision spindle bearings, ABEC 7(P4), with optional Timken bearings with ABEC (5(P5), or custom bearing systems to assure the highest possible spindle concentricity.  Special applications can be accommodated through the use of special stronger bearing systems. 

Coolant Supply

High Pressure Coolant through tools are available for the complete product range. 2000 psi standard pressure rating on all 90 degree tools and 1000 psi standard on all straight tools.

Custom Tool

Let our Design Department solve your special application and manufacturing needs by customizing a Tool to suit your requirements. We can provide custom made Tools for all CNC Lathes. These Tools have the same superior quality as our standard Tools.

Gear Systems

Only bevel gears with inclined teeth, made from special high resistance gear steel, specially hardened, ground and lapped in sets, are used to provide a smooth transmission output and minimal run out. Spur gears with straight or inclined teeth, made from special high resistance gear steel, specially hardened, ground and lapped in sets, are used to provide smooth transmission output and minimal run out.

Output Systems

• ER Collet
• Weldon
• Arbors
• Capto
• ABS system
• HSK
• CAT/SK/BT
• easy-quick HT

X
Enter your heima username.
Enter the password that accompanies your username.
Loading